Does It Matter Which DIMM Slot I Put My Ram In?

Can you use 3 RAM sticks?

To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel.

For stability & performance, never mix sets and always configure in dual channel mode..

Can you use two different brands of RAM?

You can run into issues here as not all modules are made the same. – Multiple sticks of different speeds/timings/size RAM. … Basically, you can run multiple brands of RAM but do be aware that you need to put the slowest RAM in the lowest numbered memory slots and that you do face potential issues regarding compatibility.

Is 3 sticks of RAM bad?

To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.

Can you just swap RAM sticks?

Some laptops have an access panel that lets you swap out RAM modules easily. … Some laptops require that you pretty much disassemble the whole thing to change the RAM. And some laptops don’t have RAM slots at all; their memory is soldered to the motherboard.

Do you need to change BIOS When adding RAM?

No need to update the BIOS when you’re only adding or changing RAM.

How do I know if my RAM slot is bad?

Open your computer and check the slots through trial and error. The only way to check your motherboard’s memory slots is to place a working RAM stick into each one and see if your machine boots properly. Remove all RAM sticks and place one you know is functional into the first slot on your motherboard.

Does it matter which DIMM slot I use?

I, by default, always put two DIMMs into the first two slots closest to the CPU. At least back in the DDR(1) days, that was the way to do it. But apparently, you have to put the RAM into slots 1 and 3, if you only have two sticks, in order to activate dual-channel mode.

What happens if I put RAM in wrong slots?

If ram is in the wrong slot then it wont boot. … If you have 4 memory slots and you put your two sticks in the wrong slot (assuming it boots) then it will just run at lower performance then it could and windows would be oblivious to this.

Can I put RAM in slots 1 and 3?

^ There are four slots here. If using unbalanced RAM (a 2GB and a 4GB module, for instance) pair up RAM in slots 1 and 3 or 2 and 4. If there is old RAM here and you are going to use it, pair the new RAM correctly. Try not to put three modules in a 4 module slot.

Can RAM affect FPS?

RAM amount does not directly affect FPS. The speed of your RAM could, but you can’t change that with an upgrade it’s decided when you build a system by the parts you choose. RAM is fast storage.

Can I add 8gb RAM to 4gb laptop?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)

Do all 4 sticks of RAM have to be the same?

You can even mix sticks although not recommended and a higher chance for the ram not playing nice together. Do all 4 sticks of RAM have to be the same? Yes, it is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.

Does it matter what slots I put my ram in?

Normally, you fill Bank 1 first and then bank 2. If the RAM is mismatched then you want to Place matching pairs together If all RAM is the same brand and size, then it does not matter. If you have 2 4GB RAM cards and 1 8 GB Card then the two 4GB cards go in slots 0&1. And the single 8GB card goes in slot 2.

Which DIMM slots to use first?

If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.

What happens if you put RAM in backwards?

Do not insert RAM modules backwards. After the computer is turned on with the RAM modules backwards, the RAM slot and the offending RAM module are damaged. In rare cases, it may damage the motherboard. If you do not feel comfortable opening a computer, take the computer to a professional.

Does RAM have to be in first slot?

If you are using SDRAM or single-channel DDR-SDRAM, then it usually doesn’t matter which modules go into which slots. But a few motherboards require that you start with the first slot and fill them in order, so you may as well do it that way.